scrappystickyinkymess


Leave a comment

Mount for unmounted stamps – my best use for the Creative Palette (and a cheap alternative)

So there is history here.  You might like to go back and read a few previous posts (or not, as you prefer.)

  • My review of the CP v the Gelli plate and where I die cut it with my Sizzix

That last link is full of warnings – press the stamp HARD onto the CP.  Don’t use it in this way if you worry about messing up whatever you are stamping on to. Shake the mount.  Wash the backs. blah blah blah.

I kept finding that, with every use, the CP surface got less and less sticky and washing it was too much of a bother if I had to do it every time I wanted to stamp an unmounted stamp.

I store most of my unmounted stamps like so:

In binders, and then in baseball card sleeves:

I have not ever wanted to go to the expense of mounting all the stamps, and bulking up the binders.  So over the years I have come up with a few different methods that work for me.  Generally, a strip of strong double-sided tape on a clear mount will do the trick.

I bought a bottle of Aileens Tack It (over & over) cause lots of people recommended it as a good way to make the red rubber, unmounted stamps into “cling” stamps.  It works, sure, but then you have to store all these sticky backed stamps. Ah … No.

Fast forward to the post of CP as mount and….an idea!

Yep.

Why this works – first, the CP is just a bit spongy.  Not too spongy, but enough that it acts as both the mount and the cushion and gives a nice image (might have been nice had I actually shown that – sorry, I’m out of practice at blogging) especially when stamping on to my cork-floor-tile-in-a-big-ziplock-bag stamping mat. Second, there is only the couple of CP chunks that are sticky. Easy to store.  I keep a lot of plastic packaging.  This is from a Spellbinders die.  I just flipped the halves so rather than tightly encasing the die, there is a slim open area that fits two of the sticky CP bits.

Perfect fit.

Now, this makes sense for me because I already own a (mostly useless for the kind of monoprinting I like to do) Creative Palette.  But the CP is not widely for sale anymore (or not that I could find) and if you don’t already have one, this is not a good enough reason to go buy one.

As a cheap alternative, I had a go at coating a piece of sticky-backed fun foam with the Tack It.  It worked just fine.

There is a slight issue with the fun foam being quite thin.  When you press to stamp the sticky surface can just grab the paper – I found this to be most problematic with tissue paper, not at all an issue with a paint-coated journal page, for example.  I did not find it as much an issue with the CP-as-mount.

In hunting for my CP package, I unearthed a nice gelli-print, so I can add at least one decent looking image for you LOL!:

Now I must decide what to do with it.

If you have a Creative Palette gathering dust, why not turn it into a set of stamp mounts? If you don’t have one, try the sticky-backed fun foam.  Let me know if it works for you!