scrappystickyinkymess


8 Comments

Homemade stamp pad and white acrylic ink

So there was a post on UKS about white ink.  A trick that was shown at CHA for stamping with the Dylusions spray ink came up.  Now, I had this on the way via mail order, but hadn’t received it yet, and I didn’t have a blank stamp pad (another new product) so, as is my way, I went on a hunt in my overstocked craft room to see what I could come up with.

I grabbed a few things:  a bit of Fun Foam, a bit of fabric store felt (not the thinner, less dense craft felt, although I have that too and it might work almost as well) and an old dried up stamp pad.  I peeled off the dried foam from the stamp pad. I cleaned it of old ink and dried it, then stuck a bit of the felt to a bit of the fun foam (I had high-tack spray adhesive for curtain making on hand, but other stuff might work too)  and cut it to fit the empty stamp pad.

stamppadacrylicink

I stuck it to the empty stamp pad with low-melt hot glue – I thought the hotter glue might melt the foam, and the low melt version was already in the glue gun anyway.

2stamppadacrylicink

I thought having a lid MIGHT make this something I didn’t have to wash out after use. I may cut a piece of plastic to cover the pad, a bit like the plastic over a Staz-on, tho’ not so tight-fitting, to see how that works.

I squeezed a bit, maybe a dropper full, of the Speedry liquid acrylic ink onto the pad and stamped with it.  I didn’t bother with mounts for the stamps, and to be fair I think that might have given an even better impression, but for all the types I tried they ALL worked well.

3stamppadacrylicink

Here you can see the range

4stamppadacrylicink

Nice and white, I think.  So I tried two other things – first using the acrylic ink on a bit of Cut&Dry foam, and then on an off-cut of the fun foam & felt version.

5stamppadacrylicink

A couple of points here.  First, the Cut&Dry foam is really deep and it holds a lot of ink.  For me, that means you either need to be very gentle when “inking” the stamp so you don’t get too much of the liquid ink in the depressions of the stamp (making the text in particular less crisp) OR you need to be very sparing with the ink when loading it – and that balance can be tricky.

See the orange, done with the C&D foam VS the purple with the fun foam & felt?

6stamppadacrylicink

7stamppadacrylicink

Now, as this IS acrylic you do need to be sure to clean your stamps…I’m just sayin’…

So then I got my order and had a go with the Dylusions white ink – I really should have turned the bottle a bit but you should be able to tell that is what it is:

8stamppadacrylicink

Taking into consideration I am NOT using the suggested blank stamp pad, I think it’s pretty good – white, fairly crisp (as crisp as a loose floppy stamp is ever going to be LOL!) and even the smallest text is pretty clear.

But here is where it gets interesting.  My annoyance with all things ink and the fact they bleed when you apply anything wet over them has been mentioned before (often? Perhaps….) so my next step was to check the permanence.  With the acrylic ink I didn’t just wet the paper, I saturated it:

10stamppadacrylicink

and guess what?  It made NO DIFFERENCE at all. But even wiping over the spray ink version with a baby wipe, you are left with this:

9stamppadacrylicink

Side by side:

12stamppadacrylicink

So there you go. I DID try Distress stain as well (can you JUST see the bottle top middle of the photo above?) but I might as well take a photo of a plain black piece of paper, it was so … nothing.

What’s left? Well, I should try washing out the homemade pad to see what happens to it, and likewise I should try leaving it with the lid on for a week or two and see if the ink stays wet. If it doesn’t, how the dried ink will affect the pad might be worth seeing.  But to be honest making the actual PAD is something I would only do for white.  For the colours, I think I would use a bit of the fun foam & felt just loose,  then rinse it out when I was done stamping whatever ink colour I was using.  I did try mixing colours on the pad, which worked but my camera died at that point, and with DD unwell and home from school, I now need to spend some Mom time with her.