scrappystickyinkymess


10 Comments

Will I ever STOP?!

I am just having the most fun with my calendars.  I really and truly will stop soon, but I just have so many ideas I kinda feel like I have to see them through or I’ll forget!

I think this one is just perfect for a gift, cause it’s a gift and a card in one.  Oh, I know that little easel cards with tear-off calendars have been around for yonks but I think this one is just that little bit different.

Start with these printables – or any printables you fancy, but they should be no bigger than 3 x 3 in order to fit with the measurements I am giving here.  Now, I realize that the way I did it is not ideal (just that it’s a little time-consuming with the Nesties) but I don’t have a 3″ circle punch.  I’m going to explain how I did it with the Nesties (Standard Circles Small, 2nd largest die) and suggest how you can do it with a circle punch instead, which will be way faster.

1. Start by cutting the sheets along the faint grey lines.

2. Position the die.

3. In order to ensure that they are all cut in EXACTLY the same position, stick a piece of low-tack masking tape across the die, just at the edge of the sheet

4. Now, cut.  When you prepare to cut your next circle, simply line up the edge of the tape with the edge of the paper and you will have a perfectly matched cut. Take a little care that the bottom edge of the die is level.

If you are using a punch, I would mark the line on the underside of the punch with a Sharpie and use those marks to line up the punching.

Now, as usual, make your stack, and glue.  I showed this in a previous post.

How cute is that?

Now for the stand and card part.  I saw a post by Scrapdolly from UKS for making a calendar stand.  Hers has a binding wire at the top, but I was looking for something a little simpler for this.  But the stand idea fit perfectly for what I wanted!

Now, fair warning.  This is based on A4 paper.  You could cut down 12 x 12 cardstock to A4 size (and that is 11.7 x 8.3 inches so not the same as US letter) or you can fiddle with the measurements and get something close – I’ll have a bash at saying what I think would work, but I’d test it on scrap paper and tweak the measurements.

1. Cut a sheet of A4 paper to 5 inches along the long side and score it at 5 3/4 inches.

2. There will be just about 1/4 inch difference between the two “halves” – score at that 1/4 inch

3.  Score the side without the extra 1/4 inch at 1 1/2 inches

4.  On the side WITH the extra 1/4 inch, score at 1 3/4 inches (so 1 1/2 inches past the 1/4 inch score!) Crease the folds like so:

That is basically it 🙂 Add a line of double-sided tape (one with a backing on it) to the 1/4 inch valley, or to the inside of the opposite side, like shown here, and LEAVE THE BACKING ON IT.

Now, decorate your card – There is a lot of scope for you to do what you like, but I did mine very simply – someone commented that their hubby had asked them to be on the lookout for a little desk calendar so I have to admit something less “pretty” was in my head (and I also still have scraps from the CD one I did with that ancient Basic Grey line on my desk, so…)

I cut a black circle a bit bigger than the calendar bit and added a scrap over the top, echoing the cut off top of the circle.

I decorated the inside with some scraps and circles that I printed a sentiment on – I thought the sentiment matched the gift perfectly! Just another scrap and room on the lower circle to sign it!

I think I would fold and secure it for the person if I were there when I gave it to them, otherwise I would just add a slip of paper explaining how to assemble. Or as an alternative, make it, fold it, and add the sentiment to the BACK of the calendar. Due to Karen’s clever stand idea, it will easily collapse to fit in an envelope when it is already assembled!

The disadvantage is that if their desk faces a door the sentiment will be on view, but that is a minor issue.  Just don’t be gushy! It will fit in a 5.5 inch square envelope.

Now, US letter paper.  I would cut it to 5 x 11  inches wide, then score in the middle at 5 1/2 inches.  Score one side end at 1 inch and the other at 1 1/4 the at 1/4.  You will have only a one inch stand, but I’m not sure that will make any difference.

Phew.  That was a pretty huge post, but I hope you find it useful!