Some years back I got a box of Sukie labels from Amazon, I think. I always planned on using them and just never got around to it. But I spied them on my shelf in a recent tidy-up and thought I might try to actually use them.
One of the things I love is the box – It is lovely and sturdy with a clear insert in the lid. It gave me the idea to make a mini to fit inside.
Aren’t they cute?
When I do a project like this I am always using scraps and cheap card to experiment with the construction. Here are a few of my attempts, including the one I settled on.
The pages of the mini at just shy of 5 x 7 (4 7/8 inches x 6 7/8 inches) as the box is just OVER 5 x 7 by 1/8 inch each way. It’s about 1 1/4 inch deep.
Cut your pages – I did six pages in three colours. All the cardstock tones nicely with the labels.
Cut three labels shapes. I used the Grand Labels 4 (one up from the smallest) because that let me get all I needed from one sheet of cardstock – but you have to be careful in your cutting! I cut my 12 x 12 sheet into three 4 x 12 strip. I cut ONE label from the top of each. Using a little smidge of tape will keep the die from shifting and wasting your resources. Once you cut the first one, there isn’t enough left to cut a second FULL one, but you can cut two halves from each side, like this.
You will now have 3 full and 6 half label shapes.
Take your first full label and line up the points along an inch groove on your scoreboard – you want to make sure they are lined up. I have a mark along one groove so I can see the top and bottom of the line all down the board.
Score either side of the point at 1/8 inch (I have the MS scoreboard so that is the first BLUE line. Crease well.
On your second label, score at 1/4 inch either side (BLACK line). On you last one, score at 3/8 inch either side (next BLUE line). Now you have these:
Take your 1/2 labels and trim them to match each of the sides:
Set those aside for the moment.
Add some good strong double-sided adhesive to the BACK of the smallest and the middle labels, just within the score lines. Like this:
Carefully matching the points, nest the labels, as so:
Now add your pages. Stick the first page to the inside face of the outer label. Stick it just up to, but not at all OVER, the crease. You need to make sure the crease can open and close. Flip that, as if opening the book, and stick the match 1/2 label to the back, like this:
Carry on with each page till they are all added. You will have this!
So that is the spine. I’ll show how I did my cover (although you can do any one of a bunch of different options from this point) and maybe a little of the decorating, tomorrow.
I’m loving how it is looking at the moment and with the labels it will be perfect for a garden visit or a walk in the woods, or any other outdoors-y occasion. And it fits PERFECTLY in the box so Woo Hoo for that – me, math, challenged don’tchaknow?
Gosh I’ve missed my minis.